The FT050 Acu-Test Pack consists of a USB cable that you can use to connect your FT wind sensor to your PC or laptop, and our Acu-Vis software. Once you have loaded the software, you can check the functionality of your wind sensor, change the settings, and see the wind speed, direction and temperature in real time.
The Acu-Vis software can be downloaded from our website, but you will need to use the password that will be sent to you along with the cable. Alternatively, you could use a serial emulator program (such as Tera Term* or HyperTerminal*) to communicate with the sensor using the commands as described in the Command Parameters section of your product manual.
The FT050 cable is only for use with the FT205 model wind sensor.
*Please note that FT Technologies is not responsible for the content of external sites.