世界坚固的风传感器

探索FT7系列产品
FT7 series surrounded by ice crystals

Acu-Res® 技术

FT独有的声共振（Acu - Res®）技术在全世界关键的控制系统中备受信赖。Acu-Res®风传感器自动补偿空气温度、压力和湿度的变化，以保持数据的连续性。 

了解更多关于我们的技术

承受世界超恶劣的天气 

FT风传感器已被证明可以在极端环境下提供可靠的数据，从海上风电场到冰岛输电线。其密封等级达IPX6K，耐腐蚀、浪涌保护及强大的加热除冰功能。 

power line in snowy mountains

为什么选择FT风传感器 

质量

从最初的货物检验，到校准和测试，质量是FT Technologies 公司生产的核心原则。FT通过了ISO 9001和ISO 14001认证，并在新产品开发过程坚持APQP4 Wind的标准。

性能

读取风速从0到90米/秒，并以10赫兹频率输出数据，FT独有的Acu - Res®技术为用户提供精确测量的、无任何延迟的风数据。

可靠性

硬阳极氧化铝的防水外壳，工业级连接器和整体加热，确保FT风传感器即使在极端条件下也能提供可靠的风速和风向数据。

产品认证

风控制系统

根据风速和风向对设备进行精确调整，意味着用户需要可靠的风数据。FT风传感器最新开发的软件和气动声学的实现方法，为用户提供最佳的性能、效率和可靠性。

35年的经验

FT Technologies公司设计和制造声共振式风传感器已有超过35年的历史，作为风电行业领先的供应商已超过20年。我们在英国设计和制造所有的风传感器，并出口到全球。 

了解更多
Front of FT Technologies office
FT7 series wind sensor photograph with schematic diagram behind

FT7系列

FT7系列风传感器是易安装、免维护的解决方案，即使在极恶劣的条件下也可以全年运行。

了解更多
FT6 series wind sensor photograph with schematic diagram behind

FT6 系列

FT6系列风传感器为专业性能而设计，同时最大限度地减少自重对最终用户的影响。

了解更多

WHAT OUR CUSTOMERS SAY

The FT205, mounted on our drone, worked perfectly in real fire situations. The data it produced proved critically important to the emergency services as they were able to predict the spread of the blaze during the night.

Javier Prada Delgado

Dronetools SL

After hearing about the reliable performance of the FT sensor and then holding it in my hand and feeling the difference in weight and size, I was convinced. The weather can throw anything at us now. Changing to the FT sensor has made it possible to keep these turbines running, even in our coldest winter conditions.

Guy Le Blanc

Minnesota Wind Farm

The FT wind sensor was the only one to survive – the other two ultrasonic wind sensors were so badly damaged they stopped working altogether. The FT sensor, however, remained ice-free and continued giving measurements, and that was one of the worst icing events we have ever seen at the observatory.

Cesar Lopez

Sieltec Canarias

We are actually amazed that sometimes we see FT sensors that have been on turbines for over 10 years and they are in such good condition that you can’t even tell that they’ve been sitting on the top of a turbine for that long. And where we have customers with turbines in cold climates, we also feel the FT sensors are best. With their better heating system, they give much better availability for the turbine operator. The FT742-DM50 is a great new model. It is easy to align with the laser tool and, once fitted, you can be sure that it will always be aligned, even if you have to change it.

Anders B. Jensen

Spica Technology ApS